Canon Service Mode touchscreen printer

TS8100 series: TS8120, TS8140, TS8150, TS8151, TS8152, TS8160, TS8170, TS8190, TS8195
TS9100 series: TS9120, TS9140, TS9150, TS9155, TS9160, TS9170

1) Когда шнур питания подключен и питание принтера выключено, нажмите и удерживайте кнопку ON до тех пор, пока загорится индикатор питания

2) когда индикатор питания горит, удерживая кнопку ON, коснитесь сенсорного экрана, где Stop (красная рамка, показанная выше) пять раз *,затем отпустите кнопку «Вкл.». (Каждый раз, когда нажимаете на экран, индикатор питания выключается и включается поочередно.)
* Без сканера коснитесь сенсорного экрана шесть раз.

3) Принтер готов к работе в сервысном режиме для обслуживания

2. Запустите Service Tool  на подключенном ПК  (V5.103):

 

Когда и как подключить принтер к ПК:
Подключите принтер к ПК и запустите принтер в сервисном режиме. Индикатор питания принтера начнет мигать.
В левом верхнем углу окна «Service Tool» отображается серийный номер подключенного принтера.

 




 

1) With the power cord connected and the printer power turned off, press and hold the ON button until the Power lamp lights

2) when the Power lamp ligh , while still holding the ON button, tap the touch screen where the Stop button is to be (the red-framed area shown below) five times* , then release the On BUTTON. (Each times the screen is tapped, the Power lamp turns off and on alternately.)
* Without the scanner, tap the touch screen six times.

3) The printer is ready for the service mode operation

2. Start the Service Tool on the connected PC (V5.103):

 

When and how to connect the printer to the PC:
Connect the printer to the PC and stert the printer in the service mode. The printer Power lamp will blink.
At the top left of the Service Tool window, the serial number of the connected printer is displayed.